| Specification | Details |
| Model | RS-6004C |
| Low Pressure Range | 5.0KPa ~ 101.3KPa |
| Minimum Pressure | 5.0KPa |
| Control Accuracy | ±0.5KPa (≤40KPa), ±2KPa (40-80KPa) |
| Pressure Release Rate | 15KPa/min ±3.0KPa |
| Vacuum Leakage Rate | Approx. 0.8KPa/hour |
| Vacuum Pump Noise | ≤75dB |
| Machine Dimensions | 800 × 750 × 1370 mm |
| Weight | 300 kg |
| Power Supply | AC 220V 50Hz |
Five Key Features
✅ Ultra-low pressure simulation down to 5.0KPa
✅ High precision pressure control: ±0.5KPa/±2KPa
✅ Efficient vacuum system with leakage ≤0.8KPa/h
✅ Stable pressure release rate: 15KPa/min ±3KPa
✅ Complies with international standards UN38.3 and IEC62133
Related Products
The RS-8000A2-50KN Battery Puncture and Compression Tester is designed for testing battery and power battery packs under puncture and compression conditions. It simulates potential risks like local thermal runaway or internal short circuits caused by compression or external puncture forces. During the test, real-time data on puncture force, stroke, battery surface temperature, and voltage changes are collected and synchronized.
High and low temperature battery explosion-proof test chamber ITM-DEP is designed for power batteries, electric cells, electronic products and other products, parts and components, a variety of materials for high temperature, low temperature test, the equipment can simulate temperature changes in the conditions of Bian on the product, parts and components, materials, such as slanting the quality inspection and reliability testing.
The Double-layer high and low temperature explosion-proof test chamber ITM-DEP-288L is designed for high and low temperature testing of batteries, batteries, electronic products and other products, parts and various materials. The equipment can simulate the quality inspection and reliability testing of products, parts and materials under the condition of temperature change
The testing battery sample is placed on a flat surface with a 15.8 earth 0.2mm (5/8 inch) diameter bar placed crosswise over the center of the specimen. A 9.1kg or 10kg weight is dropped onto the sample from a certain height (610mm or 1000mm or 1500mm). Cylindrical or square cells are subjected to the impact test with their longitudinal axis parallel to the plane and perpendicular to the longitudinal axis of the steel column. The longest axis of the square cell is perpendicular to the sub-steel column, and the most heavenly surface is perpendicular to the direction of impact, and each cell is subjected to only one impact test.
Precise Testing: Simulates battery compression under high and low-temperature environments with ±0.5% accuracy.
Wide Application: Complies with multiple international and domestic testing standards (GB, UL, IEC, UN38.3, etc.).
Advanced Technology: Equipped with Panasonic servo motor drive and ball screw transmission.
Customizable: Adjustable compression speed (0.01–1000mm/min) and holding time (0–99h).
High Safety: Features automatic explosion-proof, smoke exhaust, and fire suppression systems.
Model: RS-8000A2
Application: Designed for battery and battery module crush & puncture tests, simulating localized thermal runaway or internal short circuits.
Real-time Data Collection: Monitors pressure, displacement, puncture force, surface temperature, and voltage curve.
Customizable Testing: Adjustable compression and puncture speeds with various fixture options.
Safety: Ensures operator safety and prevents damage to the testing environment during potential fire or explosion.
Compliance: Meets global standards, including GB/T, UL, IEC, and UN38.3
The RS-6006GDW Battery Extrusion Test Chamber combines programmable temperature control with precision battery crush testing to evaluate lithium battery safety under extreme environmental conditions. Designed for battery cells, modules, and small battery packs, it provides reliable data for product development, quality control, and safety validation across EV, energy storage, and consumer electronics industries.
The High and low temperature battery extrusion & needle testing machine RS-6006 GDW is designed for extrusion & acupuncture test of battery and battery module in high and low temperature environment. It has video monitoring function and can automatically save video and reproduce the test process.
