New Product Release

ASTM D790 Flexural Test: Complete Guide to 3-Point Bending of Plastics

2026-08-19 12:07:30
admin

A practical ASTM D790 guide for plastic flexural testing, covering three-point bending setup, flexural strength and modulus, test procedure, common setup errors, ASTM D790 vs ISO 178, and testing machine selection.

View Detail

Wire Terminal Pull Force Testing: Methods, Standards & Equipment Selection Guide

2026-08-19 11:36:22
admin

Learn how wire terminal pull force testing evaluates crimp connection strength, including test methods, common failure modes, IEC 60352-2, IPC/WHMA-A-620 and SAE/USCAR-21 standards, plus practical guidance for selecting load cells, grips and pull testing equipment.

View Detail

Rapid Temperature Change Chamber: Cooling Rate, Test Methods & Selection Guide

2026-08-18 10:39:14
admin

Learn how to select a rapid temperature change chamber by comparing 5, 10 and 15°C/min ramp rates, chamber capacity, specimen load, thermal response, test methods, and IEC 60068-2-14 requirements.

View Detail

Wire & Cable Tensile Testing: Test Methods, Standards & Equipment Selection

2026-08-17 09:56:36
admin

A practical guide to wire and cable tensile testing, covering insulation and sheath materials, finished wires, cable assemblies, terminal pull-out tests, key IEC/ASTM/ISO standards, fixture selection, load cells, failure analysis, and tensile testing machine selection for laboratory and quality control applications.

View Detail

Package Drop Test Height: How to Determine the Correct Drop Height

2026-08-15 13:12:46
admin

There is no single drop height that is correct for every package. This guide explains how test standards, packaged-product weight, distribution conditions, impact orientation and test objectives should be considered before selecting a package drop test height.

View Detail

Automatic Force Testing: The Complete Buyer's Guide for Electronics Manufacturing

2026-08-12 16:32:26
admin

A five-step buyer decision roadmap for selecting an automatic force testing machine for electronics manufacturing. The infographic guides buyers through defining test requirements, matching applicable standards, selecting key technical specifications, evaluating ROI and total cost of ownership, and choosing the right equipment supplier and support service.

View Detail

Helpful links

About ITM

Follow us

Related Links