RS-DP-03R Six-Axis Robot Auto Drop Tester: Advanced Automated Testing Solution
Technical Specifications
| Parameter | Specification |
|---|---|
| Maximum Test Height | 300-1800 mm / 300-2000 mm |
| Height Accuracy | ±0.5 mm |
| Fall End Speed Error | ≤5% of theoretical speed |
| Maximum Drop Weight | 2 kg / 3 kg |
| Test Count Range | 0-999,999 cycles |
| Drop Height Adjustment | Touch screen operation |
| Minimum Drop Height | 300 mm |
| Clamping Method | Vacuum adsorption or mechanical clamp |
| Drop Surface Options | Steel plate, wood board, marble board |
| Air Pressure Requirement | ≥0.5 MPa |
| Machine Dimensions | 1580×1150×2520 mm (W×D×H) |
| Machine Weight | 475 kg |
| Power Supply | AC 220V, 50Hz, 3A |
Key Features
Fully Automated Operation
- Six-axis robot performs complete test cycle without manual intervention
- Automatic sample loading, positioning, dropping, and retrieval
- 24 pre-programmed drop methods for comprehensive testing
- Automatic discharge system for completed samples
Precision Control Systems
- 12-megapixel industrial camera for visual positioning
- Panasonic servo motor with synchronous pulley system
- Real-time speed monitoring before impact
- X-direction rotation: 0° to ±180° for complete coverage
Safety Features
- Fully enclosed aluminum frame structure
- Automatic safety door locking during operation
- Manual mode with unlocked doors for setup
- Emergency stop systems integrated
Testing Standards Compliance
The RS-DP-03R meets multiple international testing standards:
- IEC 60068-2-32: Free fall testing standard
- GB/T 2423.8: Chinese national drop test standard
- JIS C 60068-2-32: Japanese industrial standard
- YD/T 1539: Chinese telecommunications industry standard
Applications
Electronic Products
- Smartphones and mobile devices
- Tablets and portable computers
- VR/AR devices
- Wearable electronics
Components Testing
- Touch screen modules
- Glass cover assemblies
- PCB assemblies (PCBA)
- Battery packs and cells
- Camera modules
Automation Capabilities
Sample Handling
- German Schmitz vacuum suction cups for secure gripping
- Optional mechanical clamping fixtures for irregular shapes
- Automatic sample alignment with drop fixtures
- Programmable positioning for different product sizes
Test Execution
- 10 devices simultaneous testing capacity
- Automatic posture adjustment for edge, corner, and surface drops
- Customizable drop sequences and patterns
- Automatic test completion detection
Data Management
Measurement Systems
- High-speed velocity measurement before impact
- Acceleration data recording
- Drop time measurement
- Test count tracking
Output Features
- Automatic data export after each test
- Compatible with high-speed cameras (Phantom, Photon, NAC)
- TTL trigger signal for synchronized recording
- Customizable test reports
Quality Control
ITM-LAB's manufacturing process ensures:
- Multi-stage inspection protocols
- Component traceability systems
- Pre-delivery calibration verification
- Performance validation testing
Maintenance Guidelines
Daily Operations
- Check vacuum system pressure levels
- Inspect drop surface condition
- Verify safety door operation
- Clean camera lens and sensors
Weekly Maintenance
- Calibrate height measurement system
- Test emergency stop functions
- Check robot arm positioning accuracy
- Inspect suction cup condition
Monthly Service
- Servo motor performance verification
- Complete safety system testing
- Software backup and updates
- Mechanical wear inspection
Technical Support Services
Installation Support
- Equipment commissioning and setup
- Operator training programs
- Standard operating procedure development
- Initial calibration verification
Ongoing Support
- Remote diagnostic capabilities
- Spare parts availability guarantee
- Technical consultation services
- Software updates and upgrades
Contact Information
ITM-LAB Testing Equipment Address: No. 32 Qiaoxin East Road, Qiaotou Town, Dongguan City, Guangdong Province, China Industry Experience: 27+ years in testing equipment manufacturing Patent Protection: CN 201710788643.0
