Why Choose ITM-LAB?
With over 26 years of expertise in the testing equipment industry, ITM-LAB is a source factory with in-house R&D, production, quality inspection, and after-sales teams. Our chambers are trusted by global distributors for their durability, high performance, and outstanding support.
Key Features
-
Extreme Temperature Shock: From -78°C to +200°C in under 5 minutes.
-
Stability: High-temperature accuracy with ±3°C stability and ±0.5°C fluctuation.
-
Durability: Inner chamber made from SUS304# stainless steel, ensuring corrosion resistance and long-term use.
-
Efficient Testing: Static mode minimizes energy consumption—ideal for bulk testing of semiconductors, electronic components, and composite materials.
-
Wide Applications: Suitable for metals, plastics, rubber, electronics, aerospace components, and more.
Technical Specifications
| Model | CTS-50L | CTS-100L | CTS-150L |
|---|---|---|---|
| Inner size of each zone | 350×350×400 mm | 500×400×500 mm | 600×500×500 mm |
| Structural design | Three zones: hot, cold, test area | ||
| External size | Subject to actual equipment | ||
| Temperature range | -40°C ~ +150°C | ||
| Preheating range | RT ~ +200°C | ||
| Precooling range | -10°C ~ -60°C | ||
| Preheating time | ~30 min (average, no load) | ||
| Precooling time | ~60 min (average, no load) | ||
| Temperature fluctuation | ≤ ±0.5°C | ||
| Temperature deviation | ≤ ±2°C | ||
| Temperature uniformity | ≤ ±2°C | ||
| External chamber | Mirror-painted stainless steel | ||
| Inner chamber | SUS304# stainless steel | ||
| Insulation | Hard polyurethane foam + glass wool | ||
| Max load | 5 KG ~ 20 KG | ||
| Door | Two independent doors | ||
| Seal | Imported silicone sealing strip | ||
| Airflow control | Hot & cold air regulated by valves |
Heating & Cooling System
-
Heating: Finned Ni-Cr electric heating tubes
-
Cooling:
-
Compressor: French Tecumseh (fully enclosed) or German Bitzer (semi-hermetic), two-stage cascade system
-
Cooling method: Air-cooled or water-cooled
-
Refrigerant: Eco-friendly R404A & R23
-
Core Components
-
Air supply: High uniformity (top discharge, bottom return)
-
Motor: Low-voltage asynchronous motor
-
Fan: Multi-wing centrifugal fan (aluminum alloy)
-
Sensor: PT100 platinum resistance (wet & dry bulb)
-
Evaporator: Multi-stage hydrophilic-coated fin-type
-
Condenser: Air-cooled fin type (32mm pipe)
-
Dehumidification: Cryogenic, through evaporator
-
Expansion valve: Danfoss
-
Sight glass: Danfoss
-
Magnetic valve: Saginomiya (Japan), Danfoss
System Highlights
-
Balanced Temperature & Humidity Control (BTHC)
Adjusts refrigerant flow based on real-time conditions for energy-efficient operation. -
Multi-stage Evaporation
Ensures uniform cold exchange and high cooling efficiency. -
Smart Flow Control
Regulated via precision thermal expansion valves for optimized performance.
If you're a testing equipment distributor, reliability, repeatability, and after-sales service are crucial. ITM-LAB provides not just quality equipment—but a full support system behind every machine. Get in touch today to request a quote or download detailed specs.
📩 Contact us: sales2@itm-lab.com
🌐 Website: www.itm-lab.com
